The Perfect Deck Stain/Seal Procedure

We call it the three step for the best deck finish.

It consists of Preparation, Product and Application. These three steps done correctly will
Result in the best finish for your deck. Short changing any of these steps will only make for a bad job.
1) Prep- Deck got to be clean! I don’t care how old or new it is, it needs to be washed. In the hands of a pro the pressure washer is the ideal tool. In the hands of a novice it will damage your deck and shorten it’s life. Never I mean Never use bleach!!! Bleach only damages the wood’s fiber and does not I repeat does not kill mold. Bleach only make mold look like it is gone, but it’s not. Bleach actually spreads mold. Bleach can also void your terminate contact around your home if you have one. Got mold use a mold killer. There are other means of cleaning your deck, but if you pressure washed it you have raised the grain. The deck needs to be conditioned, check for a product in the home improvement stores.
2) Product- Can’t say enough here, but I will say you get what you pay for! I prefer oil semi transparent for most applications. Oil feeds the wood, draws out moisture and tends not to scuff off like latex. It’s water repellant and mold/mildew repellant as well. The semi allows the grain of the wood to show through too!
3) Application- Hands down got to brush and roll. Spray just don’t cut it! Spaying does not allow for frication/energy transfer, it kind of just sits there. Hand brush and roll really presses the coating into the fiber for better protection.
Tags: advice quality deck stain seal bleach pressurewash oil wood-conditioner painter exterior alpharetta wool professional grain wood finish contractor

Labels: advice, conditioner, exterior, green friendly paint, mold, semi-transparent, solid color, stain, stain seal

                     

Cracks, dirt and mold and mildew are clear signs that it is time to refinish your deck. But signs of an unsafe deck are often less obvious. If yours was built before 2004 it was most likely made of chromate copper arsenate (CCA) lumber. These chemicals need to be sealed as to be effective and non-hazardous to people and pets. There have been cases of people getting a splinter in their hand or foot and having an allergic reaction, some needing hospitalization. CCA lumber is no longer used due to these hazards. In order to keep you and yours safe, your deck needs to be properly sealed. Not all sheens of stain or stain themselves will seal in CCA. If you are unsure please contact a professional or better yet drop us a line.

Tags: advice quality deck stain seal bleach pressurewash oil wood-conditioner painter exterior alpharetta wool professional grain wood finish contractor

Labels: advice, mildew, mold, semi-transparent, stain seal

                     

The problem with the deck was that it had been pressure washed with bleach

and left for about a year without any coating. It had the usual problems

associated with such neglect. It had very dry and cracked boards, boards

where all holding water and had mold and mildew.

We decided a pressure wash was not the best option seeing the condition of

the wood. so we elected to do a chemical wash instead. We the hand brushed

and rolled semi-solid oil base stain. The deck came out great and the client

was highly satisfied.

Tags: advice quality deck stain seal bleach pressurewash oil wood-conditioner painter exterior alpharetta wool professional grain wood finish contractor

Labels: deck, mildew, pressure wash, semi-transparent, stain, stain seal, wood

                     

Labels: advice, clear finish, deck, semi-transparent, solid color, stain seal, wood

                     

Labels: advice, deck, exterior, mildew, mold, pressure wash, seal, stain seal, wood

                     

Labels: advice, conditioner, deck, exterior, pressure wash, stain seal, wood

                     

About our deck service. Most times decks need to be pressure washed prior to coating them. Unfortunately pressure washing lifts the grain of the wood. This is evidenced when the deck dries, as it will seem rough. To counter act this we always use a wood conditioner after washing, this eliminates that rough feeling. The we apply via brush and roller or sometimes lamb wool applicator top quality stain/sealer, with our service you can typically expect three to five years of protection. If you h ave any questions or concerns please feel free to contact us.

Peace
John


Tags: advice free deck stain seal bleach pressurewash georgia lamb painter exterior alpharetta wool professional grain wood painting contractor

Labels: conditioner, deck, pressure wash, stain seal